Peiyang Chemical Equipment Co., Ltd. -

Peiyang Chemical Equipment Co., Ltd.

Showing 11 - 20 of 42, total 5 pages [First] [Previous] [Next] [Last]

fluid catalytic cracking unit
Specification: 1
Detail: OVERVIEW Fluid Catalytic Cracking Unit (FCC): FCC is one of the most important conversions processes used in oil refinery process. The purpose of FCC unit is to transfer heavy crude oil into light oil. Under the action of hea...

diesel hydrotreating unit
Specification: 1
Detail: OVERVIEW Hydrotreating process (DHT): uses hydrogen to desulfurization unit the naphtha fraction from the crude oil distillation or other units within the refinery. Application of DHT: 1. Remove impurities and polluted el...

crude oil distillation unit
Specification: 1
Detail: OVERVIEW Crude Distillation Unit (CDU): is the first processing unit in virtually all oil refineries. The CDU distills the incoming crude oil into various fractions of different boiling ranges, each of which are then proce...

processing units of oil refinery
Specification: 1
Detail: Crude Oil Distillation Unit Crude Oil Distillation Unit (CDU): is the first processing unit in virtually all oil refineries. The CDU distills the incoming crude oil into various fractions of different boiling ranges, each of ...

mini oil refinery
Specification: Mini Oil Refinery
Detail: A gas plant will also be needed to capture and separate the gas products from the CDU but was not sized, nor priced. Upon completion of the process design, the size and cost of the gas plant will be ***ermined. Air Cooling is ...

hydroskimming refinery
Specification: Hydroskimming Refinery
Detail: SGTV is high-performance float valve tray, researched and developed by Tianjin University, on the basis of absorbing the application of bar float valve, fixed tongue and guided sieve tray experience from domestic and overseas....

modular refinery
Specification: MODULAR REFINERY
Detail: PCC's Modular Refineries are designed and fabricated in our manufacturing base located in Tianjin, China. As the name implies, all equipment is constructed in modules that are designed to be transported quickly and easily anyw...

lpg plant
Specification: LPG Plant
Detail: Application of LPG Process Plant This unit is applicable to wellhead associated gas pretreatment, including dehydration, hydrocarbon recovery, compression, storage transportation and pressure regulation project, meets the r...

lng plant
Specification: LNG Plant
Detail: LNG Plant Process Process of LNG Liquefaction Plant After compression, the feed gas is processed by dehydration and heavy hydrocarbon separation units. Please see the attached PFD. Process description is ***ailed as follow...

cng plant
Specification: CNG Plant
Detail: CNG Plant Complete Flow Chart of a Flare Gas Recovery Unit CNG Compress Unit Rich methane gas meets with rich gas ethane reheated by cooling heat exchanger, this steam of gas flows through the CNG compressor to increase...


Showing 11 - 20 of 42, total 5 pages [First] [Previous] [Next] [Last]
1 2 3 4 5